------------------------------------------
Definition of Direct Digital Control:
DDC controls consists of microprocessor-based controllers with the
control logic performed by software. Analog-to-Digital converters
transform the analog values into digital signals that the
microprocessor can use.
|
|
|
|
DDC's AND
Controllers |
|
Super digital controllers with DI, DO, AI, AO, RS-232,
RS-485, Modbus, Internet Ready, Programmable, all in one.
Need to monitor events? get our programmable alarm panels.
Best Prices, why to
expend more if you can do it with less.
|
|
MD+ SERIES |
|
 |
|
The MD+ DDCs are of incredible value!
The arsenal of built-in hardware makes them suitable to tackle
the most difficult tasks with great ease. The followings are
just a glimpse of its vast capabilities. Super Controllers family,
internet ready, digital and analog I/Os, Ladder+Basic language
and more.
1 RS232 and 1
RS485 ports - Networkable with other controllers using simple built-in
commands.
Supports Modbus and OMRON C20H PLC
protocols.
First PLC programmable in Ladder+TBasic.
The first industry software
with "Ladder + BASIC" language that can easily
handle sophisticated tasks with just a few lines of codes.
Models:
MD-8, MD-16, MD-24
Optional
Periferals:
1. LCD216 or LCD420
2. Real Time Clock Battery Backup
3. EXP1616 Expansion Module
4. MD-HMI LCD with Keyboard
5. Auto485 RS-232/RS-485 Converter
MD-HMI
Network enabled:
Thanks to the many
built-in communication protocols, the Super DDCs also make more
than great serial-based I/O
boards for PCs or Workstation!
|
| |
|
MX+
SERIES |
|
 |
|
The MX+ family
of super controllers is a close sibling of the MD+ controllers. The main
difference is that the MX+ has 3 serial ports but no
built-in LCD port, whereas the MD+ has a built-in LCD port
but eliminated the second RS232 serial port.
Supports Modbus and OMRON C20H PLC
protocols.
Models:
MX-3224R
|
|
|
E10 SERIES |
|
 |
|
E10 npn & E10 Relay |
| Finally, a PLC so small and cost so little
that it can effectively replace all those bulky relays, timers
or counters found in your current control panels. Its 24V
DC transistor outputs or 0 to 250V AC relay outputs eliminate
the need for additional driver circuitry and its incredibly
low price means you actually save money while getting a technically
superior design for your next control panel project! Despite
its simple appearance, the E10 PLCs share equally sophisticated
programming tools with their larger siblings - The H-series
PLCs which comprise the T20H with 12 inputs / 8 outputs to
the T64H with 40 inputs and 24 outputs.
|
|
|
H-SERIES |
|
 |
|
|
The H-series PLC is
a family of small, low cost, pure relay-ladder
logic (i.e. No BASIC) based PLCs.The family
spans from the T22H with 12 inputs, 10 outputs to the T64H with
40 inputs and 24 outputs. Members of the H-series controller
family differ mainly in the number of I/Os (inputs/outputs), and
the type of I/Os they carry (relay or transistor outputs, PNP or
NPN types, opto-isolator inputs or high voltage inputs, etc).
The mighty little T22H programmable logic
controller packs 22 high current, high voltage I/O,
20 timers and 20 counters into an incredibly small pocket-size
board (See photo above, it is
about the same size as a 3.5" floppy disk). T22H-npn
PLC features high quality, detachable
screw-terminal blocks for ease of field wiring and ease of
maintenance. The 12-24V DC input
interface and high current (1.0A per point) outputs permit
T22H to drive solenoids, contactors
or small motors directly
|
|
|
 |
